The Model 970I Industrial Weigh Belt Feeder has a 12”, 20” and a 24” belt that is designed to meter various materials into a process at a designed feedrate with gravimetric precision. The feeder belt speed is varied to deliver material from a supply device into a process at a desired rate. A weight signal output and speed signal output are supplied for closed-loop process control.
Materials of Construction
304 Stainless Steel on all metal components
Uniform Glass Beaded surface
Enclosure
3/16” Thick Stainless Steel, Welded Construction
Full-Length Stainless Steel Conveyor Access Door on access side
Two, One-Third Length Stainless Steel Access Doors on Back Side of Feeder
Conveyor
Entire conveyor removable from the side
Two cantilevered Arms for Support
Sealed for life pulley Bearings
Double-Bladed Removable Belt Scraper
Standard Drive Components
0.25 HP DC, Washdown TENV Motor
Merrick XTRA Drive Motor Speed Controller
Right Angle Side Mount Direct Drive
Weight Sensing Device
Static Weighing Suspension (no moving parts)
Easy, 3-point Alignment
Single Strain Gauge Load Cell
Stainless Steel, Hermetically Sealed, Temperature and Pressure Compensated
350 Ohm Bridge
2 or 3 mV/V Signal
10 to 15 Volts Excitation
Accuracy
+ 0.25%
Installed Weight
505 Lbs. (315 Kg.) Standard
Feed Rates
Volumetric Throughput: 0.60 to 500 Ft3/Hr (0.17-14.115 M3/Hr.)
(Multiply Volumetric Rate by Bulk Density of Material to Compute Gravimetric Feed Rate)