Certificate of conformance, number 92-196, was issued under the National Type Evaluation Program (NTEP) of the National Conference of Weights and Measures. The certificate is for capacities of up to 3,480 STPH with belt loading of 14.5 to 145 lb./ft. at belt speeds of 100 to 800 FPM.
Weight Sensing Device
Direct Mounted Weigh Suspension (no moving parts)
Precision Alignment in both Horizontal and Vertical Planes (critical to accurate weighing)
Single Strain Gauge Load Cell
Speed Sensing Device
Magnetic or Optical Speed Sensor
Bracket Supplied for Tail (Non-Driven) Pulley Mounting for True Speed Pick-up
Connection Box
Connections for both Load Cell and Speed Sensor Wires
NEMA 4X Enclosure
Connects up to (4) Weigh Modules
Pulse Cut-Off Switch for measuring belt length
Calibration
Electronic
Material Test
Test Chain (optional)
Test Weight (optional)
Accuracy
ACCURACY: Totalized weight readings will be accurate to within +0.25% of test load, repeatable to +0.125%, over a 3:1 weighing range, based on at least three belt revolutions and at least 1000 counts of the master totalizer, when properly installed and maintained in accordance with Merrick instructions.