MC3 9010EX MasterSet ® Controller

Specifications | Manual

The MC3 MasterSet®Controller is designed to perform as a central user interface station and provide supervisory control of up to 32 individual feeders. Recipe Management as well as master setpoint is also maintained.

  • Supports a Maximum of 32 Ingredients
  • Stores up to 100 Recipes
  • Supports Weigh Belt Feeders and Loss-in-Weight Feeders
  • Modbus RTU Communication Protocol via 4-Wire RD485
  • Graphical Touch Screen Interface
  • Same Hardware Platform as the Standard MC3
  • Supports the MasterSet Recipe Configuration Software (MaRCS)
 MC Cubed MasterSet Diagram
System InformationMain Screens:

  • Main System Overview
  • System Set-Point
  • Action, Setup and Diagnostics
  • Individual Feeder Screens
  • Recipe Management Screens

Status Indicators:

  • Digital and Analog Outputs
  • Warning and Fault Alarms
  • Graphical System State
  • Trend Graph

System Set-Point Methods:

  • Internal
  • Remote and Remote Ratio Analog
  • Serial Communications

Feeder Information

Feeder Screen:

  • Feeder Labels
  • Feeder Status
  • Communication Settings
  • Process Information
  • SubTotal and Total

Recipe Information

Recipe Screen:

  • Current Recipe Data
  • Recipe Status
  • Recipe Labels
  • Blend Settings
  • Recipe Sub-Total and Total
 Logical Inputs and Outputs

Commonly used Inputs Include:

  • Run Permission
  • Reset Warnings/Faults
  • Print
  • Total Enabled
  • Lock Setpoint Method
  • System Start
  • System Stop

Commonly used Outputs Include:

  • Warning/Faults
  • System Ready
  • High Feedrate
  • Low Feedrate
  • Good Feedrate
  • High System Deviation
  • Low System Deviation
  • In Control
  • Communication Lost

Hardware

External Communication Interfaces:

  • Merrick Serial Communications Protocol
  • Modbus ASCII, Modbus+, Modbus RTU
  • DeciveNet, ControlNET
  • DF1, Data Highway+
  • EtherNET/IP, Modbus TCP

Physical Inputs and Outputs
(Standard)/(Maximum):

  • Seven (7)/(32) Digital Outputs
  • Four (4)/(16) Digital Inputs
  • Two (2)/(4) Analog Outputs
  • One (1)/(2) Analog Inputs
  • DC Pulse Output for Totalizer
  • AC Pulse Output for Totalizer

 

 

 
Print FriendlyPrint Friendly

Comments are closed.